Continental engines
Subject
Subject Source: Local sources
Scope Note: SCOPE: Use for all Continental aero motors/enginesRELATED TERMS: Airplanes -- Motors
Found in 3 Collections and/or Records:
Continental Operators Handbook (A50 Series 4 & 5, A65 Series 1 & 3, A75 Series 3), 1939-06-15
Item — TB.S6.003, Folder: TF.S6.B005
Identifier: 20210014
Scope and Contents
Document Type: Operators Handbook and Manual
Authority: Manufacturer (authoritative directive)
Document Number: AV8Special Note on page 2: “This Operators Handbook and Table of Fits and Clearances combines in one unit engines; A50 Series 4 and 5, A65 Series 1 and 3 and A75 Series 3, and therefore cancels and supersedes all previous instructions and clearance data which may have been published or issued on the above engines.”Contents: Warranty, Continental...
Dates:
Publication: 1939-06-15
Continental Red Seal, Vol. V (1928), No. 1 [Continental Motors Corporation External Newsletter], 1928-11
Item — Box TB.S7.001, Folder: TF.S7.B.0001.a
Identifier: 20170206
Scope and Contents
Document Type: Periodical (External Newsletter)Purpose: Informational.Authority: Company (Manufacturer).Document Number: Volume V, No. 1 (November 1928)Scope: Periodic newsletter written and published by the Continental Motors Corporation. Intended for "...the blended interests of all those who have the welfare of Continental at heart and who strive earnestly to promote the prosperity of the Continental...
Dates:
Publication: 1928-11
Operator's Handbook: A and C Series 4 cyclinder Continental Red Seal Aircraft Engines for your Piper Airplane, Circa late 1930s-early 1940s
Item — TB.S6.003, Folder: TF.S6.B005
Identifier: 20212020
Scope and Contents
Document Type: Operators Handbook
Authority: Manufacturer (authoritative directive)Note under "Service": "The engines described in this Handbook are of similar design and construction, their differences being in accessory drives, piston size, etc. Cylinders of aluminum heads and steel barrels are individually assembled to crankcase. Provisions are made for a Starter, Fuel Pump, Fuel Injector, and Oil Cooler on all "A" series en-gines. Provisions are made on all "C" series engines...
Dates:
Publication: Circa late 1930s-early 1940s